Ring Sizing Guide
Shopping for rings online can be difficult, and all the different sizing options can feel like an entirely new language for a first timer!
I’m all about simplifying that for you, to make purchasing your next unique and handcrafted ring an easy, enjoyable process.
So here are some of the best ways to ensure you get an accurate measurement, as well as some additional tips and tricks.
Get measured professionally
This is by far the safest and most accurate method of ring sizing.
I wholeheartedly recommend spending the time and effort getting this done at your local high street jewellers, and they normally offer this service for free too. This is especially important as our made-to-order rings cannot be resized, or returned (see our return policy for more info) - so please double check you have the correct size before ordering.
Similarly, when getting sized, it’s important to tell them the width of the ring band (e.g. a wide band would be 7mm or over) as this will determine if you have to size up to accommodate the extra width.
Measure a ring you already own
Get an existing ring that comfortably fits the finger you plan on wearing your new ring on.
Then, using your ruler, measure the widest points inside the ring from edge to edge (the inside diameter).
Use the chart below to establish the correct size.
Measure your finger using a strip of paper
Alternatively, cut a strip of paper (the same width as the ring) and wrap it around your finger, making a mark where the two ends cross each other. Straighten it out and measure the total length in millimetres (the inside circumference).
This measurement also roughly translates to European sizing e.g. a 56mm circumference works out as a UK size P, a European size 56.
Half sizes would be in the middle of the two sizes e.g. a P½ would have a circumference of 56.5mm and an inside diameter of 18.1mm.
Measuring a ring size in secret
So you want to buy your significant other a ring and you aren’t sure of their ring size? I have a couple of options for you!
First option is to find a ring that they already have and either measure it yourself using the aforementioned methods, or you can always ‘borrow’ it and take it to a jeweller’s for a more accurate sizing.
Another option (if they’ll notice it missing) is to put it on one of your fingers and mark either side of where it sits snugly, not loosely above a knuckle. Also bear in mind this won’t work if your partner’s hands are much larger than yours!
And a final option is to forgo all of this and simply buy them a Rebekah Rose Jewellery gift card and let them choose their own ring!
Additional tips and tricks
When to measure
Keep in mind that your finger size will change throughout each day and over longer timeframes. Your fingers will tend to be larger in the evenings and can be affected by hormones, weather, medication and more.
Given this, it’s a good idea to measure for a ring multiple times over the course of a day, or even a few days, to find the best size for you.
Most importantly, the ring size you choose should feel comfortable in the evening when you are feeling warm and your fingers are likely to expand in size.
How should my ring fit?
Ultimately this comes down to what you feel comfortable with.
As a general guide, your ring should fit your finger well enough so it won’t fall off but it should also be loose enough to fit over your knuckle without too much difficulty. It should also allow for natural changes in finger size which happen throughout the day.
Should I go larger or smaller?
Your ring should fit your finger well enough so it won’t fall off, but it should also be loose enough to be comfortable and fit over your knuckle without too much difficulty - and to accommodate for changes in finger size each day.
If you’re between ring sizes, or there's a reasonable difference in your size throughout the day, a good thing to bear in mind is that it’s always better to go for a slightly larger size than one that’s too small, so you should err in that direction. There's nothing worse than the feeling that a ring is too tight on your finger.
Wide band rings
If you’re purchasing a ring which has a wide band (over 7mm) this will require a larger size.
You should go up approximately a full size in the UK ring sizes.
Larger knuckles
If you have larger knuckles don’t forget that you’ll need the ring to slide over your knuckle without too much difficulty.
This is particularly an issue for those who have arthritis in their finger joints, so take special care with measuring your ring size if that's the case.
To take this into account you should also measure your knuckle as well as the part of your finger where the ring will sit. Choose a size in between your finger size and knuckle size and check to be sure that a ring that size will fit over your knuckle.